I have a Craftsman/Carvewright machine prox 10-12 years old. I just purchased a new one from Carvewright and am wondering if I can use my scanning probe and patterns etc. on the new one? I need to get it up and running rather quickly. Thanks.
I have a Craftsman/Carvewright machine prox 10-12 years old. I just purchased a new one from Carvewright and am wondering if I can use my scanning probe and patterns etc. on the new one? I need to get it up and running rather quickly. Thanks.
I believe once you register the machine to your account and get a unlock code for the new machine all software from your first machine including the probe should work.
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Do you have the extension cable and clip?
CarveWright CX Packaged System - starting at $2000
CarversClub 1 Year Subscription - $150.00/year
Adv. Support w/out CC membership - $25.00/issue
CarveWright Community Forum - PRICELESS!
So the old probe's had a different connector to plug into the Truck. This is the cable that converts the plug to now let you plug the probe into the side of the inside cover.
Since the probe software does not transfer if someone sells the machine you will likely find a cheap newer probe if you post a wanted post. They are very cheap since you need to either already have the probe and software or purchase it new with the software. I know you already own the software and a old probe. I wanted to mention this if you wanted a newer probe.
So once you register and unlock the machine you can use all your old patterns and projects on both machines.
Photos are from 2007. You MAY already have the proper connector and may not need the jumper...
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com