Originally Posted by
Dale
You had me doubting myself so I just went out to check. The first message you get is "Press stop to Jog" When stop is pressed you get the message "Select (1) Abort (2) Retry (3) Jog" I tried the arrows at that point and they are not active. Pressing 3 puts you in the Jog mode. According to the manual once you are in the Jog mode the arrows are active until you press any number. Once a number is pressed you are now in the co-ordinate mode. In my case I only press the number 3 once to initially get into the Jog mode then either the arrows are active or it wants me to enter the X co-ordinates. If it wants the X co-ordinates I have tried hitting stop and that puts me back into the (1) Abort (2) Retry (3) Jog page again. If I press Retry or Jog it just puts me right back to the Enter X Position message and pressing Abort, aborts the whole project.
The only thing I can think of is when I press 3 to get into the Jog mode the machine is seeing it as pressing the number more than once. I have tried pressing and releasing the 3 as fast as possible and still occasionally get into the co-ordinate mode. My biggest concern is seeing if there is a way to change from co-ordinates to the arrows. It gets a little frustrating having to restart a project until I get the arrows to work.