I created a couple templates and carved them out yesterday. They are for the Candlestone Gifts items. I originally planned on using my 3/8 straight bit bit found it still have the QC chuck from my first machine. I switch everything over to the 3/16 cutting bit and missed changing the outside rectangle to 3/16 so the template ended up a little large. I have made some changes but wanted to know if someone could verify the inset is correct for both of the templates so as I can get a perfect fit of the blanks.
I have also attached my first lithopane carve. As you can see, it is a tad high on the plate leaving more space at the bottom than at the top.
Thanks,
Chris