After 10 years and several thousand hours on 5 machines, I thought I was familiar with every problem the Carve wright might have. But I could use some help on this last one. The machine started having board sensor issues. Incorrect measurements then the "can't find board edge" issue. When I checked the board sensor (white paper test) it would read 156 to 159. Surprisingly, it would show 109 even after I removed the board sensor. I have never seen anything but 0 for a bad or missing sensor. This particular machine is a lower hour model A with the 907? Z upgrade.
If anyone has any advice on what the issue is, it would be appreciated.
Thanks,