Results 1 to 4 of 4

Thread: Will this layout work going through the machine

  1. #1

    Default Will this layout work going through the machine

    I have a client who installs Gym floors. I have been able to start getting some of their leftover flooring pieces and am going to do a sign for them. I have staggered the boards on the ends, keeping the first one the full length of the project.

    My question is, will this work OK going through the CW? I am going to center the logo in the middle of the longest board, the first one, so there will be more then 6"-8" on each end so as to stay under the rollers.

    Thanks in advance for you assistance,

    Chris Jones
    Attached Thumbnails Attached Thumbnails NAH Logo Layout.jpg  

  2. #2
    Join Date
    Aug 2008
    The Great Texas Gulf Coast


    No. Put in filler pieces and make it properly prepared material. Masking Tape may also be your friend.
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  3. #3
    Join Date
    Sep 2007
    Northern Colorado


    Place them on a sled/carrier board and add filler pieces or tape over the voided areas.
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group

    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  4. #4
    Join Date
    Oct 2010
    Cornwall Ontario


    Also remember you can only carve 1/4 inch deep before you hit your joint.Less if it is flooring from China.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts