Results 1 to 4 of 4

Thread: My Carvewright struggles with Cut Path DXF cuts sometimes...Hardware?

  1. Default My Carvewright struggles with Cut Path DXF cuts sometimes...Hardware?

    My Carvewright struggles with DXF cuts sometimes...it will start cutting inward with each pass (which creates a 45 degree angle) It's failing more and more on cut paths. As it cuts, it cuts in closer than I designed it to with each pass. I am inclined to think that it's a hardware issue. I use pine for almost everything I cut. I have been noticing that that the axis that crosses the board (Left and right) is getting jumpy. This is an issue for me as it costs me material.

  2. #2
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    Show some pictures. Are you talking about X tracking issues and stair stepping?

  3. #3
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    How many carving (cut motor) hours do you have? It could be bad/dirty bearing on the Y truck or in the Y gear box.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  4. #4
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,854

    Default

    Is it just on DXF vector carves? Try the attached test carve.
    Clint
    Attached Files Attached Files
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •