Results 1 to 7 of 7

Thread: What I hav ebeen up to

  1. #1
    Join Date
    Sep 2009
    Location
    Goodman, Missouri
    Posts
    2,922

    Default What I have been up to

    For the last three years, I have had no time for carving or even working within my shop. I, with a little help have been building a barn (maybe even a new shop inside). It is 30'x50' with 12' sides and 21' to the peak. Basically I have had another person helping me up until the siding went on. Then it has all been myself painting, building the sliding doors, hanging them, putting on trim and just last week I installed the side door. This has taken up all my spare time (well other than when my grandson spends the weekend with me)
    Over the next few post I will show the progress. This spring I will finish the bottoms sealing the barn, and I hope to trench and install the electric service.
    Attached Thumbnails Attached Thumbnails barn05c.jpg   barn01.JPG   barn03.JPG   barn05a.jpg  

    barn06.JPG  
    Last edited by eelamb; 02-27-2017 at 05:41 PM.
    Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.

    Eddie





  2. #2
    Join Date
    Sep 2009
    Location
    Goodman, Missouri
    Posts
    2,922

    Default

    next group
    Attached Thumbnails Attached Thumbnails barn08.JPG   barn12.JPG   barn17.JPG   barn24.JPG  

    barn25.JPG  
    Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.

    Eddie





  3. #3
    Join Date
    Sep 2009
    Location
    Goodman, Missouri
    Posts
    2,922

    Default

    Last group only a couple. I hope to get back to carving if not this year next. Also tear down that mobile and removed it.
    Attached Thumbnails Attached Thumbnails barn29.JPG   barn34.JPG   barn28.JPG  
    Last edited by eelamb; 02-27-2017 at 08:06 PM.
    Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.

    Eddie





  4. #4
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,504

    Default

    Eddie,

    Super cool but man that looks like a lot of work. Glad you have been staying busy.

    - O

  5. Default

    That is a really nice barn, I would love to have something like that.

  6. #6
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,936

    Default

    Eddie,

    Great looking barn (you better get that woodshop in there)! Thanks for sharing what you have been up.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  7. #7
    Join Date
    Sep 2009
    Location
    Goodman, Missouri
    Posts
    2,922

    Default

    Thanks everyone, Floyd and others have seen these images on FB as I posted them. Oscar, yes a lot of work and a whole lot more to go. It was built to have a second floor, but that is low on the list right now. Electric is high on the list, and finishing the outside bottom on three sides.
    Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.

    Eddie





Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •