Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: puck lights for lithos

  1. #1
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default puck lights for lithos

    Attached are puck lights I use for my lithos, Lowes in my area does not carry these any more. If anybody would like to look around your area stores to see if they still have them in stock it would be a great help to me.
    Thanks in advance. Drop me a PM if you find any. I also checked EBay, Amazon did not find any either.
    Perry B
    Attached Thumbnails Attached Thumbnails IMG_0834.JPG   IMG_0835.JPG  
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  2. #2
    Join Date
    Feb 2009
    Location
    Benton County, Missouri
    Posts
    1,078

    Default

    This was the last place I got my puck lights. Came from this forum some time ago. Good lights.
    https://www.jacobsparts.com/cat/LED_...g/Puck_Lights/

  3. Default

    These seem the same as jacobs parts but half the price. http://www.ebay.com/itm/ABI-3W-LED-P...QAAOSwtfhYpNCv

  4. #4
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default

    Is there a heat problem since the litho is enclosed and only a inch or two away from the light
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  5. #5
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    At only 3 watts, I would not think it can get very hot.

  6. Default

    When using LED's I have had no problem with heat.

  7. #7
    Join Date
    Dec 2014
    Location
    Kaukauna, Wisconsin
    Posts
    767

    Default

    That is one of the nice things about led lighting is the lack of heat. Led lighting never should get so hot you can't touch it. I have it on steady here at the house and use it in many projects. The heat is so low you can use hot melt glue to secure the lighting and it hold great.

  8. #8
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default

    Thanks for the heads up , the ABI looks like a good replacement and at a better price. I did find a seller on EBay for the Utillitech puck light. Just one other question, did the ABI have some sort of switch to control it? I read up on it on EBay and did not see the switch. I will try to contact the seller to make sure.
    thanks again.
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  9. Default

    I do not believe these come with switches, I do not use puck lights. I do use these switches on led lights.

    http://www.ebay.com/itm/5x-Inline-ON...AAAOSw4CFYo82V

  10. #10
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    Quote Originally Posted by myshop1044 View Post
    Attached are puck lights I use for my lithos, Lowes in my area does not carry these any more. If anybody would like to look around your area stores to see if they still have them in stock it would be a great help to me.
    Thanks in advance. Drop me a PM if you find any. I also checked EBay, Amazon did not find any either.
    Perry B
    Hi Perry,

    I looked online and cannot find that model anymore. I'll check my local Lowes next time I go in. Dang. Those were my favorite puck light for the rotary lithos. I loved the touch-control dimming and on/off feature. What a shame - it appears the company has discontinued a great product. I always felt they cost $4 or $5 too much, but could't find a comparably featured product anywhere else.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •