I made these for my veterinarian and his wife. The wood is Oak and the grain in oriented vertically so they are less apt to break. The names are mounted in a slot in the base secured with 5 minute epoxy and #4 brass screws.
I made these for my veterinarian and his wife. The wood is Oak and the grain in oriented vertically so they are less apt to break. The names are mounted in a slot in the base secured with 5 minute epoxy and #4 brass screws.
Last edited by SteveNelson46; 12-26-2016 at 12:00 PM.
Steve
Steve, good looking name plates.
There's a lot of cutting on those. Looks good.
Last edited by SteveNelson46; 12-26-2016 at 02:01 PM.
Steve
Outstanding work! Creative design!!!
Wow, I can't imagine making something so complex on the carvewright is it double sided?
Very nice project.
Very nice work love them.
can you share the pattern if you can thank you in advance
Henry
Every one has a photographic memory. Some just don't have film.