Results 1 to 3 of 3

Thread: any thoughts or adjustments on this

  1. #1

    Default any thoughts or adjustments on this

    here is what I came up with for My friends Farm , Any Ideas or thoughts as to depth or size for the tractor and farm to come out better after carving{depth, size , bit ect} its a 6.5 hr on best carve so tweaking now may help I know from past carves they tend to break out thanks for any input
    Attached Files Attached Files

  2. #2
    Join Date
    Dec 2010
    Location
    Coeur D'Alene Idaho
    Posts
    686

    Default

    I have used that board for many signs and this is what I have found works best for me:

    For the barn and tractor use Bit Optimization "Best" and Draft "Small" ( You have small draft on tractor but not on the barn.)

    For the lettering since Little Falls NY is smaller I would suggest making the height smaller around 40 or 50.

    This is just my preference, nothing wrong with what you already have.

  3. #3
    Join Date
    Dec 2010
    Location
    Coeur D'Alene Idaho
    Posts
    686

    Default

    Oh, forgot, add a small draft to the letters.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •