Need pattern

[Woodrat]

I can not remember who helped last time. I need this picture turned into a patter i can carve. Thanks Roy.

[bergerud]

You have to post a better picture. Are you carving wood or a litho?

[Woodrat]

Wood Let me see what i can do.Will this one work? Roy

[oscarl48]

Here is a poor attempt. Hopefully whoever helped you last can help again. I am not very good at porting 2d pictures so sculpted the pattern but also not very good at it yet.

[Woodrat]

Thanks for what you did. I think i can work with this. Roy

[Woodrat]

Can you go back and toggle construction lines. They are showing up when i enlarge the pattern. I can not get the out. Thanks Roy.

[fwharris]

Can you go back and toggle construction lines. They are showing up when i enlarge the pattern. I can not get the out. Thanks Roy.

Are you trying to use the image he posted or the mpc? The pattern in the mpc looks clean to me.

[Woodrat]

I am trying to use the image he posted. I don't know mpc. Can you help me? Thanks Roy.

[Dale]

Don't use the image. Download the Dog face ptn. and open that in Designer.

[oscarl48]

Sorry didn't explain well. The enclosed pattern is in the default carvewright file format. You can download and open in designer to load onto the pc card.

If you do need the picture let me know and I'll try to get a better one.