Flash card

[edsingletary]

In the very recent past I had to have a new SSD installed in my laptop, which I use for all my carve stuff. Since I got it back I noticed mpc I made are nowhere to be found that I saved under carvewright: forms: images. I learned not to do that again. But anyway, the mpc I want to modify is safe on the flash drive for the carvewright. So can I download it back to the laptop. I can't seem to find the magic button on the flash manager. Or am I just screwed again.

[Dale]

No unfortunately a project on the card cannot be brought back into Designer. I wish it could.

[bergerud]

An mpc gets complied into carving machine code when uploaded to the flash card. The original mpc cannot be recovered from the flash drive.

[edsingletary]

Wooo bad news. Thanks all