Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Candle Holders: A Twisted Pair

  1. #1
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Default Candle Holders: A Twisted Pair

    Well, I finally got a chance to finish the candle holders. They were carved out of Myrtle wood using the Rotary Jig and have tapered opposing twists. Each one took 7.5 hours of carving time using the optimal setting and the 1/8" long carving bit.
    Attached Thumbnails Attached Thumbnails Opposing Twisted Pair.jpg   Top View.jpg  
    Last edited by SteveNelson46; 01-17-2016 at 12:22 PM. Reason: Wording
    Steve

  2. #2
    Join Date
    Aug 2008
    Location
    north ont Canada
    Posts
    2,365

    Default

    Very nice carve and hope some day will have rotary jig but money of ours is to low ,,,Steve you do great work and thx in the past for the help
    Henry

    Every one has a photographic memory. Some just don't have film.

  3. #3
    Join Date
    Aug 2011
    Location
    Michigan
    Posts
    1,109

    Default

    Great job on them, Steve. I also like the choice of using Myrtle wood. It gives them a great look ....
    John
    www.jdmwoodworks.com
    Facebook Page: click FB button on web page

    Bessemer, MI (shop location)
    Lake Gogebic, MI (where I hang my hat)

    "He who wants by the yard, but gives by the inch, should be kicked by the foot"...

  4. #4
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    Those are very cool Steve. How did the ends of the carves go? Was there some flexing?

  5. #5
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,877

    Default

    Steve, spectacular pieces. Thanks for sharing.

  6. #6
    Join Date
    Sep 2010
    Location
    Hereford, AZ
    Posts
    236

    Default

    Wow those are beautiful. Great job.
    Heather

  7. #7
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Default

    Quote Originally Posted by bergerud View Post
    Those are very cool Steve. How did the ends of the carves go? Was there some flexing?
    I made sure that there was minimal pressure on the sliding plate but there was still a little flexing. It was fairly easy to clean up using a detail sander and some hand sanding. I thought about reducing the center hole from 1" to 3/4" to make the flutes a little thicker but the bit extension that I had was too large in diameter. I also tried to eliminate the hole entirely but the flutes are tapered and the bit didn't go deep enough on the base end.

    I'm still having a little problem with the jig at the seam and I may need to send it back to LHR for repair or replacement. It's within hand sanding limits but still a PITA though. Especially in hard to reach areas and on hard or dense woods. Maybe I should test your version of the rotary jig and see if it helps. Myrtle is relatively soft so the cleanup this time was easy. It also has a weird smell. Kind of like mentholated Vicks.

    I ordered a couple of Honduran Rosewood blanks for the next set. They were $36.00 each so I sure hope nothing goes wrong.
    Last edited by SteveNelson46; 01-17-2016 at 12:12 PM.
    Steve

  8. #8
    Join Date
    Jun 2008
    Location
    New Windsor, MD
    Posts
    688

    Default

    Beautiful work.

    Dave

  9. #9
    Join Date
    Feb 2011
    Location
    New Jersey 07748
    Posts
    828

    Default

    Those are so cool ... I need a lot of upgrades for my machine, and a rotary jig ... Someday I'll hit the lottery ...
    Mans Quest for knowledge,,, means he'll always find a way !!

  10. #10
    Join Date
    Feb 2009
    Location
    Western New York
    Posts
    899

    Default

    Very unique piece of work!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •