Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Needing help with pattern

  1. Default Needing help with pattern

    I need a little help with a pattern.
    A friend of mine wants me to do a sign for her son in law
    with one of these designs. Colorado School of Mines.
    Any help would be greatly appreciated.

    Thanks,
    Hope
    Attached Thumbnails Attached Thumbnails MINES&triangle_full_RGB_TM.jpg   UniversitLogotif.gif  

  2. #2
    Join Date
    Nov 2007
    Location
    Las Vegas NV
    Posts
    1,267

    Default

    Mine Logo.mpcThree side.mpc

    I hope this will work. Let me know if you need more.
    Leo Davenport
    Enjoy Life Carve Something everyday

  3. Default

    Thanks, Leo
    Sorry late getting back but I have been busy, like everyone at this time of year. Trying to finish up gifts.
    I have attached my sample pattern is there any way to set it to use a 90 degree bit to cut like centerline
    Just wondering if it could be done, to try and clean it up a little.
    Thanks Hope
    Attached Files Attached Files

  4. #4

    Default

    This one begs to be done in 2.5D IMHO.

    Click image for larger version. 

Name:	mines.PNG 
Views:	23 
Size:	108.9 KB 
ID:	79037
    Attached Files Attached Files

  5. #5
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    Here is an attempt using Vector Groups. All will be cut with the 90V bit. mpc is Designer 3
    Attached Thumbnails Attached Thumbnails SOMC Screen.png   SOMC Screen VG.png  
    Attached Files Attached Files

  6. #6

    Default

    Quote Originally Posted by bergerud View Post
    Here is an attempt using Vector Groups. All will be cut with the 90V bit. mpc is Designer 3
    What software did you use to make the vectors?

  7. #7
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    Quote Originally Posted by DickB View Post
    What software did you use to make the vectors?
    I just traced them in Designer with the import trace and the smart spline tool.

  8. Default

    Thanks for all of your help!!!
    Will try to carve it shortly !!!!

  9. #9
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    You might want to tweak the size of the text. Take a close look at it all. You can move things around.

  10. Default

    It carved great but I am wanting to carve it on a board that is 14 x 15 and can't seem to get the board settings and the design in
    the center of board. HELP!!!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •