Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Board sensor reads 0

  1. #11
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    With nothing to loose... I would take a knife and cut down the back of the black plastic removing the flap. That will expose the LED's and Photo detector and let you slide the window out and clean it. Seal is all back up with tape...

    And I would order a 4 wire board sensor cable too... It will let you test them from the top of the machine. See part number on the 2011 parts order... the last time I ordered parts...

    AL
    Attached Thumbnails Attached Thumbnails BS2.jpg   BS3.jpg   BS1.jpg   DSC08510_WEB.jpg  

    DSC08509_WEB.jpg   DSC08492_WEB.jpg   LHR Order 8 2011.jpg  
    Last edited by Digitalwoodshop; 10-11-2015 at 07:04 PM.
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  2. Default

    Great idea on ordering another wire, I'll definitely look into that.
    As for cleaning the lens, I do take them out and clean them but noticed they get scuffed and scraped over time so I kept an old plastic package from some tool I bought a while back and a couple times a year I cut a new lens's and put it in.
    Thanks for all the recommendations

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •