ribbon or bow

[henry1]

[QUOTE=SteveNelson46;251555]

Well steve I tried it and used a 1/8 bit to cut out and its not working for me is there something I am missing like cut out it like its going to cut to big also to cut it saying to deep to cut with 1/16 bit man lost now[/QUOTE


Henry,
You need to set the board thickness to .25" or less to use the 1/16" bit.

I know what your saying, but the one I used to have the board was 3/4 and I was using the 1/8 cutting bit and not the 1/16 so how do I make it so it will cut the 3/4 board