Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: CW in storage long time. How can the noise be reduced?

  1. #1
    Join Date
    May 2007
    Location
    Presently - Mobile, Al.
    Posts
    44

    Default CW in storage long time. How can the noise be reduced?

    Just would like to know if improvements have been made in noise reduction.

    The proper workbench/table is important re: noise and vibration.

    Thanks,
    LD
    Murphy's Law= "Whatever can go will it wrong"

    ...and "If you think you can do it, or you think you can't do it, you are right." - Henry Ford.

  2. #2
    Join Date
    Aug 2008
    Location
    north ont Canada
    Posts
    2,365

    Default

    You must have the old spindle, go to carve tight spindle that help a lot
    Henry

    Every one has a photographic memory. Some just don't have film.

  3. #3
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default

    New cut motor CX style.
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  4. #4
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,854

    Default

    Henry is right, the CT spindle makes all the difference. I haven't had the oppotunity to hear (or not hear) the CX motor, but with my B and C machines the bit cutting the wood and the dust collector are the main noise.
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  5. #5

    Default

    Connie I have been checking out a laser engraver for purchase down the road.Was wondering if Carvewright had any plans to add one to the machine in the future Thanks Bert(I would hold off buyiny a stand alone one)

  6. #6
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default CW in storage long time. How can the noise be reduced?

    None that I'm aware of.
    Last edited by lynnfrwd; 09-11-2015 at 08:34 AM.
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  7. #7
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Almost as good as the Laser Engraver... The 128 GigaWATT Light Saber Bit.... But the FSC Cable could not handle the power.... and the Flex Capacitor was too big to fit in the machine.

    From the back room at LHR in 2008....

    (Humor)

    AL
    Attached Thumbnails Attached Thumbnails lightsaberbit.jpg  
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  8. #8
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default

    Quote Originally Posted by Digitalwoodshop View Post
    Almost as good as the Laser Engraver... The 128 GigaWATT Light Saber Bit.... But the FSC Cable could not handle the power.... and the Flex Capacitor was too big to fit in the machine.

    From the back room at LHR in 2008....

    (Humor)

    AL

    We actually got yelled at by some customers that did not get or appreciate our April Fools joke humor.

    Oh, well...
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  9. #9
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Quote Originally Posted by lynnfrwd View Post
    We actually got yelled at by some customers that did not get or appreciate our April Fools joke humor.

    Oh, well...
    Yes, I remember....

    My very old Epilog 25 Watt Laser has sat in the corner un used for years with a "s"... Just too many toys... Had 2 sold the oldest.

    Likely the tube is now bad and will need a $2K recharge. It is a old workhorse and worth the recharge.

    But my CW is humming away for yet another order of tags making 1.5 x 3 tags from sheet stock while I do the artwork... Life is good...

    Speakin of noise... my nearest Neighbor is over a 1/2 mile away and also a woodworker so we both make sawdust noises....

    AL
    Attached Thumbnails Attached Thumbnails DSC03969_WEB.jpg  
    Last edited by Digitalwoodshop; 09-11-2015 at 02:41 PM.
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  10. #10
    RMarkey's Avatar
    RMarkey is offline Firmware Lord, Web Guru, IT King, Raccoon Catcher, Cable-repairer, Bucket Dumper, Undisputed Thumbs-Down Champion
    Join Date
    Aug 2007
    Posts
    923

    Default

    I've looked into adding a laser bit for wood burning applications (1-3 watt), but we could never sell it because the machine cannot be sealed to the outside.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •