Anyone know if the big white gear is available? I perused the CW site and came up with nothing. I am hoping I am overlooking it.
Anyone know if the big white gear is available? I perused the CW site and came up with nothing. I am hoping I am overlooking it.
Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340
It seems when they are out of stock, it disappears from the site. I assume they are out of stock.
You do know that you can mix and match shafts and gears. The shafts press in and out.
I have found that even though I religiously change the bearings the shafts still wear. I am on my last good shaft. The shafts are really what I need. Maybe be time to call a favor in at the machine shop next door...
Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340
For future reference the part number is MWM A2073.
Maybe you should Loctite the shafts to the bearings. The shaft really should not wear until the bearing goes.
I believe LHR has posted that they will no longer sell that part as a separate part... IF you do a shaft from the machine shop, put me down for 6 shafts...
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com