Combat SeaBee Plaque- Not Carving- Little Help

[Jerrylouismartin]

ROPE2.mpc

I have made this plaque a couple of times and for the life of me I cannot figure why it won't Carve the CAN DO on the bottom and the rope does not fully carve aLSO.

Plaque too busy?

Any Help would be appreciated!

I have posted the picture and the .mpc.

Thanks!

JLM

[bergerud]

It looks to me like your head is not level. Check the the lead screw on the right side. The nut may be stripped.

Part 61: http://store.carvewright.com/home.php?cat=384

[zan29]

It happened to me once and it the head not being leveled was the problem.

[SteveNelson46]

I also agree with Suzanne and Dan. I think your head needs to be re-leveled.

[SteveNelson46]

You can find the head leveling procedure and documents here:

http://www.carvewright.com/assets/se...level_head.pdf

[SteveNelson46]

I just did a search in the pattern depot and someone else has made an oval rope border that is almost identical to mine and is selling it for $5.00. I have removed my version from all posts.

[papawbummie]

I am looking for a rotary pattern of a beer bottle with top on or off Thanks Bert