Results 1 to 10 of 10

Thread: no LED display

  1. #1
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default no LED display

    I had a problem this morning I know I messed something up and this go around isn't going to be cheap I just need to start checking what I messed up, I recently put a separate line in for just the carvewright. And was running the harbor freight 2hp dust collector on the shop outlets. Well, I ended up having all the equipment running, 4" ft fan, dust collector two above lights and the carvewright machine on the shop outlets which threw the breaker I reset the breaker and I had no LED on the panel so I'm asking what to check first.

  2. #2
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    I had a extension cord that was supposed to be plugged in to the the outlet for the carvewright and had in plugged in to the shop outlets drawing way to much power.

  3. Default

    First make sure you have power to the outlet after resetting the breaker.

  4. #4
    Join Date
    Jul 2013
    Location
    N.W. Houston
    Posts
    109

    Default

    I learned to have the Carvewright with it's own plug and by itself in a wall outlet.

  5. #5
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    Well Terry, that was a good first thing to check... have no power out of the cavewright outlet just turned everything off in the shop and checked it on the shop outlet I have the LED showing now... check all of the machine out later it's hot out "thare" and thank you, TerryT
    Last edited by aokweld101; 07-03-2015 at 12:47 PM. Reason: saying thanks

  6. #6
    Join Date
    Mar 2013
    Location
    The Colony, TX - Suburb of Dallas
    Posts
    294

    Default No Power?

    I have seen this before at work. For some reason, no power to any of the devices.
    Attached Thumbnails Attached Thumbnails PowerStrip.JPG  

  7. #7
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Red face

    Quote Originally Posted by Proctorw View Post
    I have seen this before at work. For some reason, no power to any of the devices.
    If you can get this to work there will be a huge market for it.
    Last edited by SteveNelson46; 07-03-2015 at 05:56 PM.
    Steve

  8. #8
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default

    (((Lost)))

    Any additional appliances on outlet is not suggested. It can stall the flow of current and give you an error message.
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  9. #9
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    Alright, Stupidy is a good thing to laugh at... LMAO !!!

  10. #10
    Join Date
    Aug 2010
    Location
    Central NJ, In the Pinelands
    Posts
    120

    Default

    Quote Originally Posted by Proctorw View Post
    I have seen this before at work. For some reason, no power to any of the devices.
    I have done this and spent a few hours troubleshooting the issue!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •