OK, I see what you might think in theory but you need to use two boards one for the drawers themsevles and one for the drawer fronts to fit into the other, other wise you would have a 1/4 gap between the drawers and drawer fronts
OK, I see what you might think in theory but you need to use two boards one for the drawers themsevles and one for the drawer fronts to fit into the other, other wise you would have a 1/4 gap between the drawers and drawer fronts
Last edited by aokweld101; 08-30-2015 at 12:15 PM.
I have the first two boards done and I finally... finally got what I wanted after 7 boards the 8th board I finally hit it... I still have to get battery's for the camera I will post as soon as I get picture, AS it was a Lotta work to get the font and drawer fronts..
I have the 3.0, I just have used the background pattern, on where it is the cut out is how do I get to where it does not use the pattern in the center to save carve time ? ...the second drawing is how it is going to look as a example.
I am having trouble posting the project it might be for trying to put both on at the same time.. bottom of the pattern is what I am askin help for.
I think the gui. is having problems with me uplaoding..try another way
Just draw another 34 X 3 rectangle and make it a 0.00 carve region.
and this is my example of what it will look like with just two of four boards
Copy and paste all cutouts and convert them to zero carve regions.