Centerline is another option if you have it, bottom right of the text window should allow you to change to centerline or outline. If you don't have this option but you have a V bit, you can do your text layout as stated above, then right click and select outline. Once you've made outlines of the text, delete original text, then select all of the outlines, right click and select assign bit, select V bit (90 or 60 degrees depending on what you have) and set depth to .03" or play around w it to see what you like best. Hope this helps! Oh, and welcome to the forum!
Paul
-Paul
"The secret to getting ahead is getting started." -Mark Twain