Just finished this one today. 11" x 22" out of cypress.
Senior Member
Another one out the door
Just finished this one today. 11" x 22" out of cypress.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Junior Member
that looks great. How does cypress carve. It's fairly soft to my recollection.
A Series machine purchased in 2007
had 30 minutes running time up till 2-13-15
Ring Neck Blues DC Insert (outstanding job keeping machine clean!), HF DC blower
Designer 3.102, Pattern Editor, Pattern Sculptor, STL Importer, Scanning Probe, 2D Vector Drawing Suite, 3D Pattern Modeling Suite, Centerline text, Conforming Vectors, CarveTight Chuck, Decorative Bit set
Universal Laser ILS series laser engraver with dual laser cartridges 135 watts total with 24" x 48" table and Class 4 module
Senior Member
Looks great, like the color contrasts along with a paint job. Probably isn't a bad thing to have a lawyer on your side.
Rcik H.
Senior Member
Who the painter nice
Henry
Every one has a photographic memory. Some just don't have film.
Junior Member
Very nice and fantastic paint job.
Mike
All Gave Some,
Some Gave All.
My computer configuration and software used:
Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.
Senior Member
My wife saved me this time, the lady lawyer gave me the color layout, but my wife notice she had said navy blue, to me it was just blue. My wife always does the painting for me.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
At least your wife helps you, mine gives the carve a glance and "looks nice" She lost the wow factor after about ten carves.
Senior Member
Nice work by you and your wife. You guys make a great team, I'm sure in many ways!
Senior Member
I have the same problem and your not aloneOriginally Posted by aokweld101
Henry
Every one has a photographic memory. Some just don't have film.
Senior Member
Big and the little going out together
I added this one this afternoon for a friend, only 20 min. and finished.
And my wife did not touch this one!!!!!!!
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Posting Permissions
Reply With Quote