-
Broken Cutting Bits
Question,
What is the best technique to prevent breaking bits when doing a cutout. I already do the cutouts in stages, (.25), I have over 3.5 inches (on each side) added to my work piece to avoid the roller issue, and I am using the 1/8th cutting bit.
I thought there was a way to trick the machine so it feeds slower, but when I select the 1/16 bit, it gives the "Board is too thick" error.
Is it possible in future updates of the software, that we can manually select the feed rate for the cutting operation, to prevent bit breaking?
Woody
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules