Junior Member
Pattern help also needed
I have a customer who is wanting a sign to hang outside their camper. I have several patterns that I have purchased, but he wants his camper.
I have spent a lot of time trying to get a good pattern. When I'm able to get pattern editor it may help. Attaching a picture he sent. If anyone can lend their assistance in making a pattern I will be grateful. Time is not free, I'm willing to pay for your time and pattern. Please PM me with your suggestions.
Member
Here is rough one.
Brent
A,B machines, PE,probe,conforming vectors, centerline, 2d,3d,stl and dfx imprt, rotary , 3.xx, Pattern Sculptor
OS X Yosemite
Woodwork is what I do to pay for my tool addiction.
Junior Member
Thank you so very much!!!!! So I may learn, please tell me how you were able to do it. Is pattern editor the tool that work the best?
Member
I don't know if it is what works best, but it is what I have.
I sometimes edit the photo before importing but I did not this time.
I am by no means a pattern maker but will always try.
Brent
A,B machines, PE,probe,conforming vectors, centerline, 2d,3d,stl and dfx imprt, rotary , 3.xx, Pattern Sculptor
OS X Yosemite
Woodwork is what I do to pay for my tool addiction.
Senior Member
Originally Posted by Bob Victor
I have a customer who is wanting a sign to hang outside their camper. I have several patterns that I have purchased, but he wants his camper.
I have spent a lot of time trying to get a good pattern. When I'm able to get pattern editor it may help. Attaching a picture he sent. If anyone can lend their assistance in making a pattern I will be grateful. Time is not free, I'm willing to pay for your time and pattern. Please PM me with your suggestions.
Will this work? Send a "PM" with an e-mail address, I can send you the Pattern file. BJB
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
Senior Member
Nice work!
Junior Member
I am looking for rope pattern
for rotary jig (the rope pattern doesn't I have wont work) Bert
Senior Member
how long and thick do you want the rope?\
Just checked, the one I made is 12" long and 2.4" thick. It is a single strand with 6 twist around a center core, with 6 of these twisted around another center core to make the rope. File is an stl and will have to emailed to you. so send me a pm with email address. Or let me know if you need it unwrapped, and as a ptn file for ed bakers jig.
Last edited by eelamb; 12-17-2014 at 11:28 AM.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Senior Member
Making of a simple rope using MoI3D. took about 3 minutes.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Member
Wow, you guys make it look so easy!
Posting Permissions
Reply With Quote