selling "A" machine parts cheap

[shinndog]

bought a used A machine and after I got it I decided just to part it out, after using the parts I needed for my own machine. So if interested just post what you need. Parts will be cheap and cheap shipping so let me know what you need thanks

[CNC Carver]

What parts did you use? What would you want for whats left?
Jeff

[shinndog]

Jeff I bought a new spindle flexshaft assembly and that's all I'm keeping. What left is everything else the cut motor is good and all other motors seem to be working. has good sandpaper belts. so make a offer for all thanks Harold

[manddrakes]

bought a used A machine and after I got it I decided just to part it out, after using the parts I needed for my own machine. So if interested just post what you need. Parts will be cheap and cheap shipping so let me know what you need thanks

I believe my craftsman is an "A" machine, do you have the electrical like the controller/display and the x-termination board? Thanks, Mike

[lynnfrwd]

Controller needs to be programmed with your machine serial number.

[shinndog]

I have both, I don't understand what connie is saying

[manddrakes]

I have both, I don't understand what connie is saying

I would be interested in your machine for parts if I can have the controller programmed with my serial number. I P.M. you my phone number, so if you get a chance call me. Thanks Mike

[manddrakes]

Controller needs to be programmed with your machine serial number.

So, what would I need to do if I was to purchase the controller from shinndog to get it to work in my machine? Register his machine in my name?

[lynnfrwd]

No call office on Monday. Talk to hardware tech.

[Captdave]

I am very interested I what you have....
Dave
pereiradavid66@yahoo.com