Cribbage Peg Storage
Since a started making cribbage boards with my machine I always wondered why nobody had come up with a solution in which cribbage pegs could be stored in the board. I did come up with a simple solution which I will share with anyone who is interested. I found what they call a key locker at our local variety store. I cut the magnet off and carve an opening in which I glue the box. You have to be careful as the box requires a I/2" depth. Most of my board require a 1/4" depth so I had to go to 7/8" thick board to keep from carving through. See the attached picture.
Thought someone would be interested,
caklmk
Reply With Quote