Results 1 to 3 of 3

Thread: Cabinet doors. Raised panel

  1. Default Cabinet doors. Raised panel

    I was very fortunate today that a friend gave me 20 cabinet doors of various sizes. All are maple and raised panel. I would like to carve on the panel which is a half inch thick but the sides are three quarter inch. Is there a way I can just do a pattern in the center and somehow tell the machine to use center as reference instead of the edges. It will measure depth and come up with 3/4 instead of 1/2.
    Is all this making sence. I hope I'm explaining this right.
    I feel lucky to have gotten the doors, all maple. Just have so many ideas for them if I can properly tell CW what I want.

  2. #2
    Join Date
    Jul 2012
    Springtown, TX


    There is a way……..Set you machine for "jog to touch" on.
    I don't use it much but there are plenty here who do.
    I would have to go to tutorials to remember how to do it.
    You could also set your carve depth 1/4 deeper and hight at 75

    Maybe one of the wizards will chime in…...


    A,B machines, PE,probe,conforming vectors, centerline, 2d,3d,stl and dfx imprt, rotary , 3.xx, Pattern Sculptor
    OS X Yosemite

    Woodwork is what I do to pay for my tool addiction.

  3. Default

    Thanks Brent.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts