Something like this? I did a quick trace in Corel Draw and exported as a .dxf then imported it into Designer with the DXF importer and applied the Vector Group. The point is, if you have the tools, it can be done in the Designer and it is a true v-carve. The line drawing tools could be used in the Designer to trace the bitmap but that is another issue. In the example, each closed vector can be seen by clicking on it. A 60 degree bit can be selected instead of a 90 degree and the v-grooves will be a little deeper. Just like in the Centerline function.
Last edited by SteveNelson46; 09-24-2016 at 01:47 PM.
Steve