Results 1 to 8 of 8

Thread: Sweep not sweeping properly...?!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2008
    Location
    Maryland, USA
    Posts
    224

    Default Sweep not sweeping properly...?!

    Am struggling a bit with the sweep tool, as it doesn't seem to sweep the 2d vector properly. Two issues really. (See attached MPC.) The first is that as the spiral tightens, for both the Lower Bezier and Upper Bezier, the 2d vector being swept seems to be clipped. (Hide each alternately, and this first issue is more apparent.) Secondly, despite the Lower Bezier having the 0 depth and 1/8" depth 2d swept vectors being 0.192" wide, they are clearly not equal in width, as they are in the Upper Bezier which shows an equal width to the 0 depth and 1/8" depth 2d swept vectors (until, of course, the spiral tightens). Am using 1.187. Anyone else seen this behavior? If so, is there a trick to resolve?
    Attached Files Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •