Hi guys, can I get a pattern back off the card?
I set a few objects to the same depth and some are different.
I changed the original file, can't check it.
Thx Jeff
Junior Member
getting a pattern back off the card
Hi guys, can I get a pattern back off the card?
I set a few objects to the same depth and some are different.
I changed the original file, can't check it.
Thx Jeff
Member
no you cannot
Brent
A,B machines, PE,probe,conforming vectors, centerline, 2d,3d,stl and dfx imprt, rotary , 3.xx, Pattern Sculptor
OS X Yosemite
Woodwork is what I do to pay for my tool addiction.
Senior Member - Moderator
Best suggestion would be carve what is on your card even at draft and measure the dimensions from those for comparison.
Fair winds,
Capt Bruce
Kinney deSigns http://kinneydesigns.us
CarveWright START U Team Member.
30 year USN SEABEE, the original Weapons of Mass Construction.
Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers
.
Junior Member
Ok thx guys
Jeff
Posting Permissions
Reply With Quote