Results 1 to 9 of 9

Thread: Carve too deep warning

  1. #1
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,842

    Default Carve too deep warning

    This is just an FYI. When I open rotary project where I have a rotary pattern (I mentioned making one in another thread) I get the too deep to carve warning. Checking the project diameters find no problems. It does not seem to inhibit uploading the project to the card.
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  2. #2
    Metallus's Avatar
    Metallus is offline Firmware Lord, Web Guru, IT King, Raccoon Catcher, Cable-repairer, Bucket Dumper, Undisputed Thumbs-Down Champion
    Join Date
    Aug 2007
    Posts
    923

    Default

    That shouldn't happen. Make sure the correct bit is selected. Is there only a raster carve on the rotary?

  3. #3
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,842

    Default

    It did have the wrong bit selected so I changed it, saved it, closed it and reloaded it, same thing.
    Clint
    Attached Files Attached Files
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  4. #4
    Join Date
    Jul 2012
    Location
    Springtown, TX
    Posts
    671

    Default

    Clint, look at the depth of the filigree on the outside. It is set at 75.00 .
    I don't know why it looks like it would carve.

    I found it by deleting the lion then it showed up.

    Brent

  5. #5
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,167

    Default

    Quote Originally Posted by blhutchens View Post
    Clint, look at the depth of the filigree on the outside. It is set at 75.00 .
    I don't know why it looks like it would carve.
    Brent
    It was set to additive.

  6. #6
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,842

    Default

    Thanks. The details, every little one!
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  7. #7
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Default

    Clint,

    Just messing around with your Lion Leg design and came up with this.
    Attached Files Attached Files
    Steve

  8. #8
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,842

    Default

    Interesting, but he wants filigree.
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  9. #9
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Default

    Quote Originally Posted by cestout View Post
    Interesting, but he wants filigree.
    Clint
    Here's another suggestion. Just trying to help when I can.
    Attached Thumbnails Attached Thumbnails Lion Leg-Filagree.png   Lion Leg-Filagree2.png  
    Attached Files Attached Files
    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •