Results 1 to 3 of 3

Thread: Required Diameter won't change

  1. #1
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,854

    Default Required Diameter won't change

    It worked correctly in a previous version, but that was over 3.25 and I need under 3.25, so I redid the STL conversion then copied and pasted all the rest from the working version and adjusted it. This one stays at 4.5 required diameter. What am I missing? (note: I also used extruder on this for those looking at this.)
    Thanks
    Clint
    Attached Files Attached Files
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  2. #2
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    I get required diameter 3.132". What version of Designer are you using?

  3. #3
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,854

    Default

    Must have changed when I saved it?
    Thanks
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •