mannwranglers,
About a month ago I had basically the same problem. I ended up taking the cut motor out of the machine and used epoxy to glue the pieces back together and put some pressure on it and left everything alone for the next 2 days. Evidently I did a good enough job as it is working fine now.
Mike
All Gave Some,
Some Gave All.
My computer configuration and software used:
Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.