Page 1 of 4 123 ... LastLast
Results 1 to 10 of 44

Thread: More questions than answers

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default More questions than answers

    I seen Dan's (Bergerud) bowl that he give as a example to someone today I did the carve and didn't like the way the outside edges didn't line up, but Dan struck again... He made me start thinking, so I made what I wanted for three boards on top of one another 2.25 thick. Question #1 how do I get the file into the STL folder..#2 How is the feather made for each board for the cut out...I get these two ? answered and I'm going to get this 3-d going to do the minor things and start learning how to do gimp to keep stepping up.
    Attached Files Attached Files

  2. #2
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    Answer #1. Why do you want to take it into STL?

    #2. Cut outs can only go 1" deep so you can not cut out on this.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  3. #3
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    #1...I thought by putting it into the STL files that I could slice them into .75 thick to make the bowl and do the cut outs
    Last edited by aokweld101; 05-13-2014 at 10:03 PM.

  4. #4
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Default

    Quote Originally Posted by aokweld101 View Post
    #1...I thought by putting it into the STL files that I could slice them into .75 thick to make the bowl and do the cut outs
    Maybe this will help.
    Attached Files Attached Files
    Steve

  5. #5
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    I had my stepson help me and have the file now...It sure was getting around about way to get it ..
    Last edited by aokweld101; 05-14-2014 at 07:00 PM.

  6. #6
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    I think that that may be a memory problem. Maybe you have many programs open?

  7. #7
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    Quote Originally Posted by bergerud View Post
    I think that that may be a memory problem. Maybe you have many programs open?
    I closed all the programs and just had designer open, this is the message that I'm getting. It gets to 97 percent then crashes
    Attached Thumbnails Attached Thumbnails snipping tool.PNG  
    Last edited by aokweld101; 05-15-2014 at 10:01 AM.

  8. #8
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    Floyd, I have the patterns loaded into my STL files now my next question is the thickness on my working pattern is 1.755 on the back side of the pattern how do I get the two patterns to produce three boards to do the splicing. Bear with me gents I'm getting closer....

  9. #9
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    I think it is just feather. Choose feather - none. Looking good.

  10. #10
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    Floyd you can see what I want to do, could you please tell me what I have to do to get it that way. If I can do it at all.. Thanks

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •