My rollaway compact CarveWright setup

[DJKnutsen]

I have a very limited shop area, so I came up with a very functional setup for my CarveWright machine. I started with a Harbor Freight rolling tool cart and stiffing the top with 3/4" plywood, but found it was too shaky during tooling operations... so I used four Grizzly bar clamps and removed the stationary end completely.. then I perminently bolted the bars to the four corners of the cart, and when I use the CW I slip on the sliding heads of the clamps and jack the whole thing up, which gives it a slightly wider stance, and makes it very solid! I've added the Dust Deivl collector hood (which I am very happy with!!) but found that my shop vac was being overworked in the long run times... I though about the Dyson approach to home vacuums and went looking for a similar (less expensive) alternative... I found a free Dirt Devil Scorpion on Craig's List, and modified it by removing the rug brush floor head, and the upright handle and building a wood base to support it... It has a high volume air flow, and works great (6 hr run longest to date) and has the advantage that I can knock it down and it stores on the bottom shelf of my rolling cart... a neatly packaged, compact system! And it all works well together!