Carvewright and Quality

[lynnfrwd]

Ok. Then I don't know, but that's the direction I took him to mean. I'm a girl...

[CW-HAL9000]

Ok. Then I don't know, but that's the direction I took him to mean. I'm a girl...

But a girl who can carve! Thats special!

[rmock]

I have one of those she's out in the shop right now, Yes she's very special

[swaggerstick]

Chevrolet is part of GM. I think he meant Ford, Gm, and Chrysler as they were once know as the big 3. Not sure that you can classify them that way now. It is an old term that has carried over. They all have lost a big share of the market. I worked for GM parts plant.

[Dan-Woodman]

The big three make computers that take extreme heat, cold, vibration, dust , rainstorms , etc. I would like to see LHR make a pwer supply robust enough to at lesast withstand vibration, dust and static electricity. My power supply went out several months ago just from my electric service going out and coming back on. Nothing else in the home was affected. This will make the third one I have had since 2006, so I'm waiting to see if these new ones are any better. The first two was from vibration before the new chuck.

[cestout]

I agree with Connie because I was here in 2007. But practical thing LHR might consider to improve quality, cost, and remove a problem we StrartUers have to explain and apologize for is to bring manufacturing home. Manufacturers in this country are more responsive (faster and more reliable parts delivery etc.) and worker put out higher quality then the Asian workers. Several big companies have realized this.
Clint

[Ropdoc]

I agree with texasinmi. I have had nothing but problems with my "A" version. Even sent it back for major circuit board repairs. I have done my best to be a "Loyal" customer. I even bought a "C" verson. But I am back to nothing but problems with it now. When I present my concerns and complaints. The reply back is "Well you didn't buy the warranty so we are unable to help. Unless you pay a fee." Hum a fee to fix what should have been enginnered better. I just want the machines I paid good money for to work. That is all I am asking. This last few years have hit me really hard. I do not ask for handouts. I am doing my best to support myself. But when I invest hard earned money in an American made product is it to much to ask that it work past the 3 month warranty period ?? Or if it does breakdown why not some customer care and not smart lip attitude. I am back to saving up money so I can fix both of my machines. All of this is with the hope I can make some money off of them.

[SouthernSigns]

I think what many people fail to realize with these machines is the fact that they do require end user maintenance in order to be the most effective. 80% of the problems and complaints I see on these forums is directly related to end user neglect of basic maintenance issues. Next to that, I see alot of people here who have not allowed themselves to make it through the proverbial "learning curve" that is essential to getting the most out of these machines especially the users who start complaining about quality after using the machine for 3 months or less. At 3 months in you are only just beginning to master the basics. These machines can do so much more than what many people realize, but it takes time to get to that level of mastery. LHR / Carvewright as a company is in a similar position. The machine has improved exponentially over the years. Every improvement has been a result of learning from the mistakes and from customer feedback and trial / error. What we should all realize is that the company is ALWAYS looking and working to improve their products. I cant wait to see what they come up with in the next 5 years or 10 years. Comparing a 10 year old company to a 100 year old company is ridiculous. Im sure the "Big Three" had their own issues early on with quality issues and they still do. I wouldn't buy a Ford product if my life depended on it. Why/ Because I personally think their quality is horrible compared to other manufacturers and my opinion is based on my own personal experiences with them. I too own an A machine. I have invested alot of time and effort into doing the upgrades and performing the required maintenance on a regular basis. I love my machine and it operates flawlessly every time. Do I think it could be improved? Of course. I would love to see a built in dust reduction or collection system as part of the package deal...however, my table saw did not come with a dust collector either so I think that argument is invalid. I still have to manually clean the sawdust away from the motor on my table saws and other tools that did not come with a built in dust collection system.
In summary....You will get out of the CW machine what you put into it. Take the time to educate yourself on the many tools and operations the machine can perform. Allow yourself to get through that learning curve. Most of all....DO your maintenance on the machine. It is a machine...a tool. It requires some maintenance and cleaning...Anything less than that is just lazy. Just my two cents!! Happy Carving!!!

[cjudas]

Since I am VERY new to this machine my voice may not carry too far but.... I am EXCEPTIONALLY pleased with my CW. She has done everything I have asked of her and has treated me well so far. Yes, I have had a couple minor concerns... "check rollers, check cut motor, and a flex shaft that was feeling pretty warm". With each of these issues I had the sense to STOP and do a little research on the issue. A good example is the flex shaft. I "thought" I was doing the right thing when I bought some Liquid Wrench chain lube. When the shaft heated up I STOPPED and did my research. I found out that Liquid Wrench had changed the make up of their product which made it ineffective. So, I got some of the stuff Carve Wright sells, which is a lot cheaper than Liquid Wrench and PROBLEM SOLVED. My point is, true, this is not a machine for mass production and thus, not built or designed for that. It is however an AFFORDABLE CNC FOR THE HOBBYIST, use it for that or go spend $$$$$$$ on a bigger machine and I BET you have issues with that one too. One of the BIGGEST and MOST IMPORTANT parts of MY machine is RIGHT HERE, THIS FORUM. This is where I do my research and this is where I get my solutions. It's not ALL ABOUT TOP OF THE LINE QUALITY, it's about being able to afford a machine and have FRIENDS here that help and support each other.

OK, my soapbox just broke so I guess I'm done. LOL


C Judas

[dehrlich]

Yep, do they maintenance. And don't forget how complicated this machine is, stuff is gonna break. I almost gave up on my A machine when I had all the trouble to start, but I stuck with it and now it runs like a top (knock on cyber-wood).

Also, reference the auto makers... why would anyone want a Ford or Chevy? Dodge now has the best looking stuff out there. Look at the truck I just got a month ago and tell me that a Ford or Chevy truck can hold a candle to it. Not to mention, 390 HP from the factory (I got it well over 400 already with mods). Can't be beat. But, there was a time that Dodge was the low man on the totem pole. Give it a chance, improvements are being made all the time. And the best tool will stop working if you don't maintain it... keep the dust blown out, oil it where needed, and I ALWAYS unplug the machine from the wall when not in use.. we have lots of thunder storms. My two cents....