-
Now, there is also Jog to Touch
Jog to touch designates the starting point where the bit will touch the surface of the wood, to find the surface of the wood.
The reason for 'jog to touch' is to be able to avoid certain features of the wood, like a dimple or previously carved area.
Most machine functions can be paused/changed while its occurring. If you see the 'touch surface' is going to fall off the sled, hit stop and select 'jog to touch'. If you are loading a bit and the bit plate doesn't pop out, hit stop, and select 'reload bit', etc.
-
Very good, thanks Metallus.
...Peter
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules