Results 1 to 10 of 10

Thread: 3D Rotary Jig

  1. #1
    Join Date
    Feb 2014
    Location
    Temecula, CA
    Posts
    71

    Default 3D Rotary Jig

    Does CW plan to build and market a Rotary Jig for 3D carving?

  2. #2
    Join Date
    Oct 2007
    Location
    Conroe, Texas, United States
    Posts
    1,550

    Default

    jackh,

    Welcome to the CarveWright forum family.

    Happy carving to you Sir.
    Happy Carving

    Robert D.
    rcdages

    CarveWright START U Team Member.

    The mightiest oak in the forest is just a little nut
    that held it's ground.

  3. Default

    Quote Originally Posted by jackh View Post
    Does CW plan to build and market a Rotary Jig for 3D carving?
    There is a guy who used to make and sell them both on his own and on LHR's website. He seems to have stopped but you will sometimes see used ones for sale on here. There is a thread on making your own but it all seems experimental and I have not seen some one successfully post about making one. I could be wrong. see this thread: http://forum.carvewright.com/showthr...ghlight=rotary

  4. Default

    Here is the thread from the guy edzbaker who used to make and sell the jig. perhaps you can message him and see if he still sells them. http://forum.carvewright.com/showthr...ghlight=rotary

  5. #5
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default

    Quote Originally Posted by jackh View Post
    Does CW plan to build and market a Rotary Jig for 3D carving?
    We will get right on that. Stay tuned....
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  6. #6
    Join Date
    Jun 2007
    Location
    google earth 18°27'49"N***88°18'8"W
    Posts
    342

    Default

    Hum.... Is is really hard to use?
    Carvewright A machine 2007
    Carvewright C machine 2013 DC-Insert
    Mavric iMac i7 16gig latest version
    Designer 1.187, Designer 2.04, Centerline Text, Conforming Vectors, STL importer, DFX importer, Pattern Editor and probe

  7. #7
    Join Date
    Dec 2011
    Location
    Spring Arbor Michigan
    Posts
    1,274

    Default

    Sounds like one is in the works.

    Quote Originally Posted by lynnfrwd View Post
    We will get right on that. Stay tuned....

  8. #8
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    The Jack that the Probe Data now plugs into is interesting.... I had guessed that it was placed at that location in the "A" versions un used until the probe data change was designed for a future expansion. And I had hoped that that future expansion included a Carrier Board with a Servo Motor that could hold a Round Blank in Length or the X Direction. A Program that would rotate that blank in the X, Y, Z and Rotary that made something Fantastic... It was only a Wish... Having never toured LHR Secret Back Rooms of the Research and Development guys.... I have no knowledge of that idea....

    Being a Electronic Guy... I had wondered what the Calibration Jig was like for the machine.... We got a peek of that in a LHR Post the other day on Y Calibration mentioning a Metal Plate and Electrical Contacts that when touched by the Bit told the machine about a physical point in the machine. It could have been a Self Contained Plate with Batteries or something that has all along been plugged into the little Jack for Calibration.... Or even the DB 25 Connector that is part of the Computer and accessed from the outside of the machine... I believe the Prototype Talking Module plugged into that DB 25 Jack.

    So like the new CX machine that caught me by total suprise... A Change that was in the works and has now hit the street and made public...

    Lets hope that someday we see a Rotary SLED....

    Until then..... We wait...

    AL who....
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  9. #9
    Join Date
    Mar 2007
    Location
    Unionville, NY
    Posts
    298

    Default

    Is that a hind Connie?

  10. #10
    Join Date
    Jan 2007
    Location
    Talladega Alabama
    Posts
    376

    Default

    Jack, I responded to your PM. I only sell the plans (and a small hardware kit) for My Rotary Jig at this time. Contact me through my website for information.

    edscustomcarved.com

    thank you

    Ed
    My Website: www.edscustomcarved.com
    Patterns or projects made, and uploaded by me, are not to be sold on E-Bay, EVER !.
    Thank You....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •