Hi, I tried to share this pattern,but for some reason people are having a hard time loading it....
Here it is, can someone try opening it
Thanks
Opened ok in 2.04
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Patterns exported from 2.004 are not compatible with 1.187. This is a bug which has been fixed for 2.005. Until then, export from 1.187.
Edit: although the above is true, it opened ok for me in 1.187.
Last edited by bergerud; 01-11-2014 at 07:42 PM.
All Gave Some,
Some Gave All.
My computer configuration and software used:
Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.
That is the message the 2.004 bug gives. gwizpro, how did you export the pattern?
Try the mpc.
Last edited by bergerud; 01-11-2014 at 08:12 PM.
I also open it in 2.04 no problem here what I DID
Last edited by henry1; 01-11-2014 at 08:16 PM.
Henry
Every one has a photographic memory. Some just don't have film.
Ok, Here are 2 files...
The file with 187 is exported out of Ver 1.87
The file with 2004 is exported out of Ver 2.004
Never tried to share a pattern file before , always shared .mpc files....
I exported the above files by going to My Favorites , right clicking, then exporting.
Is this the correct way....
Yes it is the correct way. The problem is a bug in 2.004. That is all. Patterns exported from favorites in 2.004 are not recognized by 1.187. Supposed to be fixed in 2.005.
Gwiz,
Thanks, I don't know what you did but they all open for me now. Should make a beautiful carving in Black Walnut.
Thanks everyone for your help. Great forum.
Mike
All Gave Some,
Some Gave All.
My computer configuration and software used:
Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.
"Carved with Love"
Happiness comes from within.
But joy comes from helping others.
Measure twice... and then sneak up on it!