Originally Posted by
tcough3475
BJB,
How did you get the white color for your project board? I'd like to switch to that for all my work as it shows the detail better.
Just use a Photoshop type program, make a square 512 x 512 Pixels, and pick a color, save as a JPEG.
Name the square; I use the pine image (Drop down window) name type. [Pine_White], for the white square. (No Spaces)
If you have a Saw Mill and cut your own wood than take a photo of your wood types and use Photoshop to make the color of the square to look like the wood you have.
You can rotate the image in the wood1 folder to show a cross grain carving, but remember the Designer Program will show the image 180 degrees from what it looks like in the wood1 folder.
If you copy and paste the image you may get too much data in your file name, remove the .jpg
Last edited by bjbethke; 12-27-2013 at 10:37 AM.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.