Page 5 of 5 FirstFirst ... 345
Results 41 to 47 of 47

Thread: resharpening a carving bit

  1. #41
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,401

    Default

    I use the one from Woodcraft. Mostly because I can buy it locally and it works good.

    http://www.woodcraft.com/Product/200...-18-Ounce.aspx
    Steve

  2. Default

    Quote Originally Posted by lovejoys View Post
    Ok Guys I do understand that the 5 bit thing is hard for the guy that only use 1-2 bits every 2-3 months this is not a fix for you guy. the cost of shipping and re sharpening is the same as a new bit. This is set up for the people that are going to use 5-10 bits a month.
    Wow do people really use 5-10 bits a month? I have had my two machines going on three years. I have about 800 hours carving time on each and other then occasional broken cutting bits my carving bits I have 4 (thought I had three but looked again) and only one of those is really not used any more due to dullness. I guess I am not a power user but I use mine often.

  3. #43
    Join Date
    Apr 2013
    Location
    Cornwall, Ontario, Canada
    Posts
    1,343

    Default

    When I received my CW, it came with two 1/16" bit. The old model and the new one. The old model was used over 250 hrs before getting dull and for the new model, 100 hrs at the most. The newer bit creates more heat which, I assume, dulls the bit faster.

  4. #44
    Join Date
    Aug 2007
    Location
    North Carolina
    Posts
    1,367

    Default

    I run 3 machines at a time. I carve nothing but sapele. I pm each of them every 150 and I use a carving but each cycle. I do that about every 3 to 5 weeks. For me they are pretty used by that time. I suppose if your doing nothing but poplar then the life would be pretty extended but that's my take on it. I don't do it as a hobby obviously.
    Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
    OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340

  5. #45

    Default

    I think a lot of people look at the cut motor time and say it is the same as bit time
    I don't think that this is true you need to look at type of wood your cutting and how many Y motor or other part you are going to use.
    if you have sharp bit less wear on all parts.
    yes you can make the bit do 500 hours it can. but all I am saying is it does cost more in part. or can

  6. #46
    Join Date
    Aug 2007
    Location
    North Carolina
    Posts
    1,367

    Default

    Quote Originally Posted by lovejoys View Post
    I think a lot of people look at the cut motor time and say it is the same as bit time
    I don't think that this is true you need to look at type of wood your cutting and how many Y motor or other part you are going to use.
    if you have sharp bit less wear on all parts.
    yes you can make the bit do 500 hours it can. but all I am saying is it does cost more in part. or can
    Another thing is a good sharp bit can save a lot of clean up time.
    Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
    OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340

  7. Default

    I haven't heard anything lately about resharpening 1/16th carving bits. Does anyone have any experience with this company that says they can do it. And are we talking the carvetight bits?

Page 5 of 5 FirstFirst ... 345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •