Results 1 to 6 of 6

Thread: Help with closing vectors

  1. #1
    Join Date
    Jan 2013
    Location
    Helena, Montana, United States
    Posts
    314

    Default Help with closing vectors

    I'm confused on drawing lines and then closing vectors so I can create a cut path. How do I draw several separate lines and arcs and then link them together so I can cut out the shape I have made? I know this is a really basic thing, but for the life of me I can't figure it out.

    Thanks In advance

  2. #2
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,172

    Default

    With both pieces selected, drag one end point onto the other and you will see a red X. Now the curves are connected as one. To check which end points yet to be connected, Toggle Non-End points under the view menu.

    (The connecting is easier if the end points are snapped to a grid.)

  3. #3
    Join Date
    Jan 2013
    Location
    Helena, Montana, United States
    Posts
    314

    Default

    Thank you.

  4. #4
    Join Date
    Feb 2014
    Location
    Indiana
    Posts
    46

    Default Cutouts

    HELP !!! I get an error message when trying to upload to memory card. "Vector loop not closed properly" This is not an important project. Just trying to learn the tips and tricks.
    Attached Thumbnails Attached Thumbnails Cutouts.JPG  
    Attached Files Attached Files
    Every one has a photographic memory. Some just don't have film.

  5. #5
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,172

    Default

    Download 2.007. This problem has just been fixed.

  6. #6
    Join Date
    Feb 2014
    Location
    Indiana
    Posts
    46

    Default

    Thank You for your help.
    Every one has a photographic memory. Some just don't have film.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •