Looks like all 3 of these mpcs have sweep set on them. I was able to upload and view them, but can't save or carve. Does look really nice though. I guess I'm going to have to compromise sooner or later and get with the program and update. LOL
My bad ......... fixed it and all is good sorry.
Originally Posted by
aokweld101
I have been making a man box or jewelry box for awhile now I'm making this for my Grandchildren... this is what I'm giving them, I would call this an advanced project... I used two pieces of 1" x 7 1/4 aromatic cedar glued together for the top & draw fronts the sides front and back.. the rest of the drawers I made on the table saw and router using the 1/4 bit. and veneer on the top tray and drawers and 1/4 slates on the slots. I'm on my fourth box now I'm going to have some happy....happy Grandkids this year...I spent Christmas last year in the hospital with a broken hip ....
Last edited by chebytrk; 11-06-2013 at 05:39 AM.
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"