I am contemplating buying these two packages but I am using 1.187 designer. what features of the new software packages do I lose by not upgrading to designer 2?
I am contemplating buying these two packages but I am using 1.187 designer. what features of the new software packages do I lose by not upgrading to designer 2?
Last edited by bjmwoodworker; 09-05-2013 at 10:31 PM.
The 2d/3d features are the same in either designer version. With 2.0 you do gain added features that work with with some of the 2d/3d features. These are the add ons with 2.0 http://www.carvewright.com/designer-2-0/
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
The 3d tools in Designer 1.187 are not very stable. If you only want to buy two of the three: 2d, 3d, or 2.0, I would recommend the 3d and Designer 2.0. I think that is the best bang for the buck. You get a much more stable system with many cool new text features. I think the new features of 2.0 are worth more than the 2d tools.
I have everything except the CO2 dragster stuff. I just think you get quite a bit more for your money buying 2.0 than buying the 2D tools. I like the 2D tools and use them all the time. It is just that if I had to make a choice, I would go with 2.0. If you are serious about using the 3D tools, I think you will want the stability of 2.0.
Last edited by bergerud; 09-06-2013 at 10:29 AM.
Thanks Bergerud for your help. I think that I like your suggestions now if we could just convince CW to offer 3d and designer 2.0 for 349.50 Btw the way I just finished making the rotary jig version 2 and I have figured out how most of the parts go together but I dont see what the rails are for... also I thought I saw a pattern for the rotary jig to test it but cant seem to find it now. again thanks for you recommendations and help
Bobby
The rail runs between the dowel and the belts. It is what rolls the dowel and lifts the roller lifter. One needs a different size rail for different diameter dowels.
The post you are looking for :
http://forum.carvewright.com/showthr...002#post207002