Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 30 inch double sided sign

  1. #1
    Join Date
    Jan 2009
    Location
    Bonney Lake, Washington, United States, 113160055365328, Bonney Lake, Washington
    Posts
    1,800

    Default 30 inch double sided sign

    Here is the 30 inch double sided sign I finished with an additional sign on the bottom. It is carved in redwood and I used Sculpt Nouveau primer for the rust color and clear coated with their eve-rclear 2 part urethane coating. This is a very helpful company and it was so easy to use. This was all carved with my CW's. These signs are going to New Your City. They also purchased a bracket from me that is being shipped separately.
    Attached Thumbnails Attached Thumbnails P1050325.JPG   P1050326.JPG  
    Last edited by easybuilt; 06-25-2013 at 11:44 AM.
    Tom Watson
    Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
    50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com

    Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood

    Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/

  2. #2
    Join Date
    Oct 2007
    Location
    Conroe, Texas, United States
    Posts
    1,550

    Default

    Hello Tom,

    Signs look good, like the color.

    I believe you are covering the USA and the world with your signs.
    Happy Carving

    Robert D.
    rcdages

    CarveWright START U Team Member.

    The mightiest oak in the forest is just a little nut
    that held it's ground.

  3. #3
    Join Date
    Oct 2007
    Location
    Conroe, Texas, United States
    Posts
    1,550

    Default

    Were these two carved on your new CNC ????????
    Happy Carving

    Robert D.
    rcdages

    CarveWright START U Team Member.

    The mightiest oak in the forest is just a little nut
    that held it's ground.

  4. #4
    Join Date
    Dec 2011
    Location
    Spring Arbor Michigan
    Posts
    1,274

    Default

    Quote Originally Posted by rcdages View Post
    Were these two carved on your new CNC ????????
    This was all carved with my CW's

  5. #5
    Join Date
    Jan 2008
    Location
    As of 6/2021 Punta Gorda, Florida
    Posts
    1,461

    Default

    Great looking sign Tom.

  6. #6
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    are U sure that is a double sided sign? or is it two signs, I can only see one side at a time....lmao...GREAT SIGN!!!

  7. #7
    Join Date
    Jan 2009
    Location
    Bonney Lake, Washington, United States, 113160055365328, Bonney Lake, Washington
    Posts
    1,800

    Default

    Thanks Robert, Sharon and aokweld101. Yes one sign (lol) and on my CW. The only signs I will post here will be carved on my Carvewrights Robert. I will put the others on Facebook. Thanks again my friends.
    Tom Watson
    Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
    50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com

    Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood

    Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/

  8. #8
    Join Date
    Nov 2007
    Location
    Aurora, Illinois
    Posts
    803

    Default

    Great job those look nice!
    Lee
    Pop's Fix It Shop, We won't make it any worse.. Using "A" machines 1.187 1.188 ,2.007, 3.103
    2 Machines no waiting.

  9. #9
    Join Date
    Feb 2006
    Location
    Kansas City
    Posts
    254

    Default

    Awesome work! If you dont mind me asking what is your process for joining the two halves?
    Most folks are afraid of heights, me I fear width.

  10. #10
    Join Date
    Oct 2012
    Location
    Northwestern Ouisconsin on the south shore of Lake Superior
    Posts
    65

    Default

    I hate you! I have been struggling to understand how to make a large sign. Gave up and carved in separate 12" pieces. Grrrrrr. One of these days I'll get it. (Great Sign)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •