Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: My probe says its open.

  1. #11
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Quote Originally Posted by bergerud View Post
    I do not believe there is a cover - truck choice with the B model any more. At least when I checked mine, I there was no longer any choice. It said (cover) and it could not be changed. I assume that the newer firmware knows it is not an A and sets it to cover.
    Yep, the "Matag Repair Man" is wondering what a High Efficiency Washer is.... LOL.... I am SO behind the Power Curve.....


    Thanks for that info.... Didn't have a clue...

    AL
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  2. #12
    Join Date
    Dec 2009
    Location
    NH
    Posts
    14

    Default

    I have the same problem.. B machine, probe is locked open..I have used a meter on the probe and it's registering, I've done a continuity on all wires from the receptacle plug to the circuit board plug, all's good no broken wires, move the probe all around, nothing changes...Stumped. Any help would be appreciated..

  3. #13
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    Quote Originally Posted by blooviper View Post
    I have the same problem.. B machine, probe is locked open..I have used a meter on the probe and it's registering, I've done a continuity on all wires from the receptacle plug to the circuit board plug, all's good no broken wires, move the probe all around, nothing changes...Stumped. Any help would be appreciated..
    Have you looked at the sensor checks to see what it is giving? Also is the probe set for the "cover" or "truck"?
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  4. #14
    Join Date
    Dec 2009
    Location
    NH
    Posts
    14

    Default

    Sensor checks read "open" (if I'm understanding your question correctly) and it is set for cover.

  5. #15
    Join Date
    Dec 2009
    Location
    NH
    Posts
    14

    Default

    I also checked the continuity on the probe, beeps when untouched and stopped when the probe is moved, I believe that this shows that the probe is functioning correctly..Do you think it may be a bad board?...Thanks for your help

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •