Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: playing with the 3-d

  1. #1
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default playing with the 3-d

    I done this 3-d Image I'm playing with the buttons trying to get a little bit more involved, I wanted to finish with a cut out and did the toggle end points and I thought they were connected but its not letting the cutout feature light up. can some kind sole tell me what I'm doing wrong. I tried to attach the file but its to big.

  2. #2
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    Try zipping (compressing) the file and up load it as a .zip file
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  3. #3
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    I tried o use a zip file and it still to big..

  4. #4
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    Can you delete irrelevant patterns until you can upload the mpc? (You could maybe change the file extension to .jpg and upload it. We can download it and change the extension back to .mpc.)

  5. #5
    Join Date
    Dec 2007
    Location
    Yellville, AR 72687-0652
    Posts
    2,369

    Default

    Quote Originally Posted by aokweld101 View Post
    I done this 3-d Image I'm playing with the buttons trying to get a little bit more involved, I wanted to finish with a cut out and did the toggle end points and I thought they were connected but its not letting the cutout feature light up. can some kind sole tell me what I'm doing wrong. I tried to attach the file but its to big.
    Your image is too large, If you have that in the Pattern Editor change the image to 10 inches, It will give you a better pattern and okay the LHR size limit.
    Using Designer Version 1.187
    Donations are always welcomed, thanks – send a check to my PO Box 652

    BJB
    PO Box 652
    Yellville,AR 72687-0652

    PM me for my e-mail address.

  6. #6
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    this is not what I had originaly, but I'm sure playing with it I'll eventually get it, but I need to still need to know what I'm doing wrong with the cutout. Thanks gentlemen for your help!
    Attached Files Attached Files

  7. #7
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,193

    Default

    Mirror does not work for making closed paths. Undo mirror. Copy, paste, and flip the left half. Now move it to so the end points coincide. Tweak the end points with the mouse to weld them. Now you have a closed curve to cut out.

  8. #8
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    Quote Originally Posted by bergerud View Post
    Mirror does not work for making closed paths. Undo mirror. Copy, paste, and flip the left half. Now move it to so the end points coincide. Tweak the end points with the mouse to weld them. Now you have a closed curve to cut out.
    de ja vu, eh?
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  9. #9
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    I tried it again and it was worse than I started I'm going back to the tutorlial ....need more input....lol

  10. #10
    Join Date
    Sep 2012
    Location
    panama city beach,fl
    Posts
    1,886

    Default

    yes, now that I think of it.... de ja vu..
    Last edited by aokweld101; 04-23-2013 at 09:07 AM. Reason: missspelled

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •