a freind gave me this logo to carve, not being very good at pattern making I need some help.
Any help would be great.
Perry
Senior Member
need a help with this one
a freind gave me this logo to carve, not being very good at pattern making I need some help.
Any help would be great.
Perry
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
PerryB.mpc
How's this? Just did it with Paint.net. Don't have any tools to fancy it up with though.
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"
Member
Hi Perry
I was practicing with a new technique when I found I was almost done with the image so I just finished it. Maybe this will work good for you.
Thanks for the business you've given me.
Junior Member
Here is what I have so far. But now I'm late for work....
Senior Member
Will this work?Originally Posted by myshop1044
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
Senior Member
Thanks fellows, I will show him the results and try to help him create a carving too.
As always you'll always do a great service. I hope to see some of you at the conference too.
Perry B.
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Junior Member
Just wondering how long it took BJ to make that MPC file? I worked on this for a couple of hours in ArtCAM to get what I came up with. It won't take much more to finish, but I'd like to compare modeling time...
Member
That looks really nice BJB. You're getting really good at that.
Junior Member
Here's a shot of my finished relief. The original image file is rendered on top of it.
Here's a shot with the default gold rendering.
Last edited by Underdog; 04-19-2013 at 03:40 PM.
Senior Member
If it is a nice clean drawing it takes about 15 to 30 Min. Longest time used is removing the background. A drawing with closed loops works the best. I use the Grayscale to adjust the "Z" truck movement. That image was good. low time spent on that one.
Last edited by bjbethke; 04-22-2013 at 11:53 AM.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
Posting Permissions
Reply With Quote