Heart Pattern

[happy]

I had made a pattern last year for a lid of a jewlery box for a friend of mine it was a outline of a heart approx 11" using a 90 degree bit at a depth of 20 with her name inside the heart, I must be loosing my mind but I can not remember how I made it i have no problem with the centerline text it is just the outline of the heart any help would be appreciated

[henry1]

this what your looking for

[happy]

Thanks for the response Henry but thats not it but i do like the heart box, All it was is a square flat lid with the heart outlined in it at a depth approx .20 with a 45 degree bit

[farmer]

I downloaded this one from the forum if it will help

[happy]

Thats on the right track that is a cutout and I need centerline It probably so simple to do but I can not remember how i did it brain just isn't working

[badbert]

Delete the tabs. Outline the pattern. Assign the V-bit.

[SteveNelson46]

This is one of the files in the Heart Box project I submitted as a free project a few months ago. You can download the entire project here: http://www.carvewright.com/assets/tips/Heart_Box.zip

[b.sumner47]

I looked through my patterns and couldn't find what you needed, Sorry. Good luck ! Capt Barry

[happy]

I got it now thanks everyone for all the help also made sure I saved it